ENDURABLE POLYMER PAVEMENT is a unique product, which provides an alternative to costly asphalt, concrete, or cement-based overlay systems. Product is a two-component system, which incorporates the use of readily available sand to create a durable surface. One of the excellent benefits is that stain and sealer may be applied as soon as the product is dry enough to walk upon, typically within 24 hours of application. Incorporating the use of ENDURABLE CONCRETE STAIN and ENDURABLE CONCRETE SEALER results in a long-lasting and beautiful surface, capable of handling heavy traffic, including industrial forklift traffic. Not only is the durability phenomenal, but the chemical resistance is good, as well. ENDURABLE POLYMER PAVEMENT may be applied over almost any existing surface that is stable.
ENDURABLE POLYMER PAVEMENTcan be used with many different aggregates, chips systems, and decorative broadcast materials. After broadcasting these materials, reclaim the excess and seal with 2-3 coats of ENDURable Sealer Mixed at 1:1.
A simple system for resurfacing old concrete is to clean the surface and then apply the ENDURABLE POLYMER PAVEMENT. Broadcast a fine light colored sand, typically 90 mesh and above. Make sure to broadcast to refusal, which should be rather quick as the ENDURABLE POLYMER PAVEMENT is a thinner material than alternative epoxy materials. After the Polymer Pavement is dry, reclaim the excess materials and then you may stain and seal the new surface with ENDURABLE CONCRETE STAIN AND ENDURABLE CONCRETE SEALER.
ENDURABLE POLYMER PAVEMENT’s bond strength test data, available on the Technical Data Sheet, was performed on tight, power-troweled concrete. Using a grinder or sander to prep your surface may yield even better results for bonding.